![Why use crossover cable How does it work]()
Crossover cable: also called reverse cable, the line sequence is arranged in accordance with the standard 568A at one end and 568B at the other end, and is clamped with an RJ45 crystal tip.The specific method of making the line sequence is: one end using: 1. white green.2. green.3. white orange.4. blue.5. white blue.6. orange.7. white brown.8. brown, that is, 568A standard.The other end of the eight lines on the basis of this line 1 and 3, 2 and 6 interchange the position, this time the line sequence of the network cable becomes 568B (that is, white orange, orange, white green, blue, white blue, green, white brown, brown order) to do the line standard remains unchanged, so that the crossover line is done!
How to do the crossover line
First.The tools and raw materials needed to prepare before making 1. different colors of wire (generally white green .Green.White orange.Blue.White blue.Orange.White brown, etc.) 2. crystal head (used to connect the two ends of the wire) 3. pliers used to make the network cable (these pliers are special pliers are very good at the time of making) Second.The method and steps of making cross wires first.We use the pliers we just prepared the outer skin of each end of the wire about a centimeter (generally we use the wire is relatively thin so we have to be careful when dialing the outer skin, do not break the wire inside) after dialing to check whether the inside of the wire is intact.Distinguish each color of wire well.Make sure not to let them get tangled together.Secondly.Straighten each color wire by hand to ensure the integrity of the wire, after checking is complete.Using a lighter or other source of ignition, set the set apart wires on fire to burn them a bit and burn the layer of paint off the wires to ensure that they are connected.
Why use crossed wires
A crossover cable is a cable that connects pin 1 on one end to pin 3 on the other end, and pin 2 to 6. When connecting the same device or a switch to a hub, or a computer to a router, using a crossover cable can transfer data in a way that other cables do not, so use a crossover cable.