There may still be some users of htcs510e how to brush is not very clear, in fact, the operation is not so complicated, as long as usually pay more attention to this aspect of things can slowly learn, next let us take a look at htcs510e brush tutorial details.
htcs510e brush tutorial step four
11. Click on FirmwareUpgrade button.
12. htcs510e in off state, connect the phone with the computer side with usb data cable and start downloading automatically without any operation.
13. If there is no downloading prompt, but some other prompts appear, please unplug the data cable and re-flash it once, repeatedly many times can not, try to reboot the computer and try again.
Disconnect the usb cable until the icon with green circle appears, so that the htcs510e phone brushing is successfully completed.
htcs510e brushing tutorial step 3
8. Click on the Scatter-loading button on the software to select the corresponding file of the software.
Then select MT6573_Android_scatter.txt in the target_bin folder you just extracted. it is worth noting here that the name of this file varies from firmware to firmware.
10. Click the checkbox
DADLAllWithCheckSum
, at check name, to check all.
htcs510e brushing tutorial step 2
5. htcs510e phone first shut down (only shut down, do not pull the battery), and the phone do not connect to the computer with the data cable, disconnect the data cable first.
6. unzip the above downloaded rom firmware package first, unzip it out with a target_bin folder.Unzip the downloaded tool SP_Flash_Tool.
7. Then find the
Flash_tool.exe
file in the extracted SP_Flash_Tool folder, then double-click it directly to run it.
htcs510e brushing tutorial step 1
1. Make sure that the htcs510e phone can be connected to the computer with a usb data cable.
2. Already htcs510e phone driver on your computer.
3. Download a htcs510e brushing package.
4. Download a brushing tool SP_Flash_Tool, download it and put it on your computer.