Some people are using their phones to connect to their computers and want to download games.Ringtones.When the software, etc., suddenly will encounter the phone through the USB connection can not be connected to the computer, which requires us to accumulate more knowledge in this area.For htc one x can not connect to the computer how to do, next let us take a look at it.

htc one x can't connect to computer solution three

Situation: after the phone htconex connected to the computer, there is no prompt to install the driver, there is no new hardware prompt in the computer hardware.
Cause.
1. you need to insert the memory card into your phone htconex and format it.Implementation steps are: set initial settings to format additional storage device (without inserting the memory card, this option will not appear)
2. When using the data cable to connect the W388 to the computer, the phone htconex will prompt: connect the phone in memory mode?, select yes, the computer will recognize the phone as a storage device, the phone screen shows in memory mode, the phone function can not be used normally.
3. Mobile memory will appear in the computer, just copy the files directly.
Situation: the phone htconex can not connect to the computer, only shows charging status.
Cause.
1. fault of the phone data cable interface.
2. phone htconex motherboard failure.
3. Software failure (such as no driver.Driver file lost), can be restored by factory settings.Hard Grid.Try to recover by brushing the phone, etc.
4. Data transfer mode not selected

htc one x can't connect to computer solution two

Situation: the phone htconex can not connect to PC suite problem.
Cause.
1. many internet cafes can't connect to PC suite, firstly because of the driver firewall, turn it off and you'll be fine.
2. again because you use the front of the computer host case or USB wiring, so you need to try with the USB port on the back of the case.
Situation: about not being able to install JAF or Phoenix and other brushing software.
Reasons.
1. First, it may be that the computer does not support, these software have running conditions, some computer platforms can not install them
2. second, is to turn off or uninstall all those anti-virus software, time monitoring, firewall, etc., such as 360 monitoring function will automatically identify as a Trojan horse in the process of downloading JAF and automatically delete!

htc one x can't connect to computer solution one

Situation: The phone htconex data cable is connected to the computer and the host is not responding to the prompt on the phone.
Reason: This is because you are using the USB port wired out of the computer connection or the USB port on the front of the case, try using the USB port on the back of the case.
Situation: The phone htconex connected to the computer, selected the data storage, the phone will prompt another program is in use.
Reason: This is because your phone is using a theme or ringtone from the memory card, the solution is of course to put the theme etc. into the phone storage.
Situation: Using the phone htconex explorer (MMMB) can not read the phone A drive
Cause.
1. First of all, the lowest level of error is that you didn't install the PC suite, because MMMB needs the driver in the PC to connect to the phone.
2. Secondly because you didn't choose the right way to connect the data cable in MMMB, and then you didn't install the registry.
3. The last possibility is that there will be a phone C drive instead of A drive, if so you reconnect the phone again, use the USB port at the back of the main case, and then open MMMB.

The principle of connecting the phone to the computer

1. Use the phone as a MODEM, the setup method is similar to the normal MODEM setup method, connect the phone to a laptop or desktop computer, etc. via USB data cable for transmission.
2. When the USB interface cable is plugged into the computer USB port, Windows will prompt to find new hardware.
3. Then select the Search for drivers for my device option again and click the Next button.
Put the phone driver CD into the CD-ROM drive, the hardware wizard will automatically search for the matching driver, click Next to start the installation.
After the installation is complete, you can see the name of the installed phone device in the modem of the Device Manager in the System Properties of the Control Panel.
6. At this point, you can use the communication software that comes with the phone to try to copy pictures and other content from the computer to the phone to test whether the two can communicate properly.