Dome camera is a representative of the development of modern television surveillance, she integrated color integrated camera .Head.Decoder.Protective cover and other multi-function with one, easy to install.Simple to use but powerful, widely used in open areas of monitoring, different occasions can be used.So what is the dome camera automatic shutdown start processing method?Let's learn about it next.

Dome camera cleaning

Battery contact cleaning method can be used.We must not underestimate the role of oxidation, although the process of oxidation is very slow and extremely unnoticeable, but it causes us really not a small problem.Many times, we do not believe what we see with our own eyes, maybe what you see is not the truth.
For a dome camera, one of the requirements to make it work is to have a battery installed or connected to a power source, so we won't talk about the power cord or battery plug here.For the battery and the camera, is the need for contacts to transmit current, because we said earlier oxidation and other reasons, the use of a period of time the camera battery, will be used because of the environment and conditions and other reasons, the contacts more or less oxidation problems.
Clean the metal contacts of the battery and the part of the camera in contact with the battery.The important thing to note here is that do not let the battery short circuit when cleaning, although the camera or mobile phone with such batteries have short circuit protection, but still try to be careful not to let the battery short circuit.The specific method of cleaning can be wiped with an alcohol swab, you can also use a knife to scrape, with a knife to scrape must pay special attention not to let the battery of the two touch short circuit.This method can be a good solution to the dome camera automatically shut down and start, so that the camera can maintain good operation.

Dome camera basic introduction

1.Preset point or preset position
The so-called preset function refers to the intelligent fast ball can be the current state of the horizontal angle of the head .Tilt angle and camera lens focal length and other related parameters stored in the memory, when needed, you can quickly call these parameters and adjust the PTZ and camera to the position.
2. Automatic cruise
The so-called auto-cruise means that some preset points can be programmed into the auto-cruise queue in the required order by pre-programming, and only an external command can make the camera automatically move back and forth in the set order of preset points with the set time interval.
3. Automatic operation
The so-called automatic operation function is the user in a period of time (time can be set freely) no operation, the smart ball can automatically return to the user pre-set an important preset position (that is, usually said to watch the position) or to perform a pre-set function: automatic scanning.Pattern Scan or Auto Cruise, etc.
4. Aperture control
The camera has an automatic backlight compensation function.Automatic brightness compensation for darker targets in bright backgrounds.Lighting adjustment for bright backgrounds.Avoid too high background brightness and cause the whole picture a bright cloud of light, but the target is indistinguishable because of darkness, so as to achieve a clear view.
5. Automatic flip
When the operator operates the lens of the intelligent fast ball to the bottom (vertical), the lens of the dome will automatically flip 180, and then turn upward, so that you can directly view the scene on the back, thus realizing the whole continuous monitoring of the vertical 180.