tplink is a mainstream manufacturer specializing in the development, manufacture and marketing of network and communication terminal equipment.It is also one of the few companies in China that has completely independent research and development and manufacturing capabilities, and enjoys a good reputation in the field of network communications.So what are the contents of the tplink router manual?Next let's take a look at it.

tplink router manual: establishing the correct network settings

Use the Ping command to check whether the computer and the router are connected to each other.In the Windows?XP environment, click Start-Run, enter the cmd command in the subsequent Run window, enter or click OK to enter the Command Prompt interface.
Enter the command: Ping192.168.1.1, press Enter, the computer has successfully established a connection with the router.If the screen shows Requesttimedout, it means the device is not yet installed, please check it carefully in order.First of all, check whether the hardware connection is correct. The criterion to judge is that the LAN status indicator on the router panel corresponding to the LAN port and the NIC indicator on the computer must be on.
Next is to check whether the TCP/IP settings of the computer are correct. If the IP address of the computer is automatically obtained, there is no need to set it.If you set the IP manually, please note that if the IP address of the router is 192.168.1.1, then the IP address of the computer must be 192.168.1.X (X is any integer between 2 and 254), the subnet mask must be set to 255.255.255.0, and the default gateway must be set to 192.168.1.1.

tplink router manual: making router hardware connections

The default LAN port IP address of the router is 192.168.1.1, and the default subnet mask is 255.255.255.0. These values can be changed according to actual needs, and will be illustrated here by default values.
Go to the Network Connections page by using the right mouse button to click on the Network Neighborhood icon on the desktop and select Properties, or through the Start Control Panel Network Connections path.Right click on the local connection and select properties.
The Local Connection Properties box pops up, drop down this connection using the following items, select Internet Protocol (TCP/IP) and then left-click Properties, or double-click the Internet Protocol (TCP/IP) item directly.
The Internet Protocol (TCP/IP) properties box pops up. you can obtain an IP address in two ways: Obtain IP automatically and Set IP manually. obtain IP automatically is to select Obtain IP address automatically under the General item respectively.Obtain DNS server address automatically.
Manually set the IP address by selecting Use the following IP address and entering the IP address in order: 192.168.1.x (x can be any value between 2 and 254).Subnet mask: 255.255.255.0. Default gateway: 192.168.1.1. Select Use DNS server address, enter the same value as the default gateway in the Preferred DNS server field, i.e. 192.168.1.1, or enter the IP address of the local DNS server.Finally, click OK to finish the IP address setting.