The phone is bricked for more operating privileges, so many people choose to go for brushing; speaking of brushing, the driver needed for brushing is essential, the next step is to bring you the Lenovo a766 bricking driver installation tutorial.

Lenovo a766 brush driver installation tutorial three

1. download a pea pod on your computer side.
2. find Applications - Developer - USB debugging mode inside the settings of the Lenovo a766 and choose to open it.
3. connect your computer with a data cable, open the Pea Pod on your computer, at this time Pea Pod will automatically connect your Lenovo a766 phone and install the driver.

Lenovo a766 brush driver installation tutorial two

1. lenovo a766 phone is in the off state, install the battery and plug in the USB cable directly.
2. at this time, the following dialog box will pop up on the PC side, while the new hardware will be found in the device manager.
3. then click Install, and from the pop-up dialog box, select Install from list or specified location (Advanced), and then click Next.
4. choose to install from disk, find the location file where the driver you downloaded is stored, and then select it, click OK, and the installation will begin.
5. prompt you lenovo a766 driver installation is complete.

Lenovo a766 brush driver installation tutorial one

1. first download the Lenovo a766 wire brush driver, select SP_Drivers_v1.5 when downloading, finish downloading and unzip it on the desktop of your computer.
2. Then turn off the Lenovo a766 phone, connect the Lenovo a766 phone and computer with the upgrade cable, when the PC has not installed the driver will pop up the new hardware wizard, select install from list or specified location (advanced).
3. click Browse to select SP_Drivers_v1.5, click Next to install the driver.
4. Lenovo a766 driver installation is complete.